Menu
Industrial Automation
E9NC-AA / VA
IoT Status Monitoring Amplifier
IoT Status Monitoring Amplifiers for General-purpose Analog Outputs Are Connectable to Various Sensors
Related Contents
Application Solutions
last update: October 1, 2018
Amplifier unit
| Type | Appearance | Connection method | Output | Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Current input |  |
Connector for Sensor
Communications Unit |
2 outputs | E9NC-AA0 | |
 |
Connector for Sensor
Communications Unit Pre-wired (2 m) |
1 output | E9NC-AA10 2M | E9NC-AA40 2M | |
| Voltage input |  |
Connector for Sensor
Communications Unit |
2 outputs | E9NC-VA0 | |
 |
Connector for Sensor
Communications Unit Pre-wired (2 m) |
1 output | E9NC-VA10 2M | E9NC-VA40 2M | |
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Accessories (Sold Separately)
DIN Track
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
| Appearance | Type | Model | Quantity |
|---|---|---|---|
 |
Shallow type, total length: 1 m | PFP-100N | 1 |
| Shallow type, total length: 0.5 m | PFP-50N | ||
| Deep type, total length: 1 m | PFP-100N2 |
Note: For details, refer to DIN Track on PFP-[] which can be accessed from your OMRON website.
End Plate
Two End Plates (PFP-M) are provided with the Sensor Communications Unit.
End Plates (PFP-M and E39-EP1) are not provided with the Amplifier Unit. They must be ordered separately as required.
| Appearance | Model | Quantity | Applicable Amplifier Unit |
|---|---|---|---|
 |
PFP-M | 1 | E9NC-AA0
E9NC-VA0 |
 |
E39-EP1 | 1 | E9NC-AA10
E9NC-AA40 E9NC-VA10 E9NC-VA40 |
Related products
Sensor Communications unit
| Type | Appearance | Model |
|---|---|---|
| EtherCAT
sensor communications unit |
 |
E3NW-ECT |
| Sensor Communications
Unit for CC-Link |
 |
E3NW-CCL |
| Distributed Sensor Unit * |  |
E3NW-DS |
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.
last update: October 1, 2018
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.