Page top

Industrial Automation

Contact

Industrial Automation

E3NC

Smart Laser Sensors

E3NC

Ideal for Applications That Cannot Be Handled with Fiber Sensors or Photoelectric Sensors

Related Contents

last update: May 26, 2025

Compact Laser Sensors: E3NC-L

Sensing method Coaxial Retro-reflective with MSR function
Model E3NC-LH03 E3NC-LH03+
E39-P51
Light source (wavelength) Visible semiconductor laser diode (660 nm), 215 μW max.
Laser class Class 1 (JIS, IEC/EN, FDA *1, GB/T)
Sensing
distance
*2		 Giga-power mode (GIGA) 8 m 0.5 m
Standard mode (Stnd) 6 m
High-speed mode (HS) 3.5 m
Super-high-speed mode
(SHS)		 2 m
Beam shape Spot Line
Beam size *3 Approx. 2 mm dia. at 1 m Line length: Approx. 25 mm at
250 mm
Line length: Approx. 50 mm at
500 mm
Differential distance *4 ---
Indicators OUT indicator (orange) and STABILITY indicator (green)
Ambient illumination (Receiver side) Incandescent lamp: 10,000 lx max.,
Sunlight: 20,000 lx max.
Ambient temperature range Operating: -10 to 55°C; Storage: -25 to 70°C (with no icing or
condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Altitude 2,000 m max.
Installation environment Pollution degree 3 (as per IEC 60947-1)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5-mm double amplitude or 100 m/s2 for 2 hours each
in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC IP67 *5
Connecting method Pre-wired connector (standard length: 2 m)
Materials Sensor Head Case Polybutylene terephthalate (PBT)
Lens Methacrylic resin (PMMA)
Cable Vinyl chloride (PVC)
Lens
Attachment		 Case --- ABS
Lens --- Methacrylic resin (PMMA)
Weight (packed
state/Sensor
Head only)		 Models with 2-m cable Approx. 120 g/approx. 70 g
Models with 5-m cable Approx. 180 g/approx. 130 g
Lens Attachment --- Approx. 25 g/approx. 2 g
Accessories Instruction Manual

Sensing method Diffuse-reflective Limited reflective
Model E3NC-LH02 E3NC-LH02+
E39-P52		 E3NC-LH01
Light source (wavelength) Visible semiconductor laser diode (660 nm), 315 μW max.
Laser class Class 1 (JIS, IEC/EN, FDA *1, GB/T)
Sensing
distance
*2		 Giga-power mode (GIGA) 1,200 mm 1,000 mm 70±15 mm
Standard mode (Stnd) 750 mm 600 mm
High-speed mode (HS) 250 mm 200 mm
Super-high-speed mode
(SHS)		 200 mm 150 mm
Beam shape Spot Line Spot
Beam size *3 Approx. 0.8 mm dia. at
300 mm		 Line length: Approx. 45
mm at 500 mm
Line length: Approx. 100
mm at 1,000 mm		 Approx. 0.1 mm dia. at
70 mm
Differential distance *4 10% of sensing distance max.
Indicators OUT indicator (orange) and STABILITY indicator (green)
Ambient illumination (Receiver side) Incandescent lamp: 10,000 lx max.,
Sunlight: 20,000 lx max.
Ambient temperature range Operating: -10 to 55°C; Storage: -25 to 70°C (with no icing or
condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Altitude 2,000 m max.
Installation environment Pollution degree 3 (as per IEC 60947-1)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5-mm double amplitude or 100 m/s2 for 2 hours
each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC IP65 (E3NC-LH02: Applies only when adjuster is locked.) *5
Connecting method Pre-wired connector (standard length: 2 m)
Materials Sensor Head Case Polybutylene terephthalate (PBT)
Lens Methacrylic resin (PMMA)
Cable Vinyl chloride (PVC)
Lens
Attachment		 Case --- ABS ---
Lens --- Methacrylic resin
(PMMA)		 ---
Weight (packed
state/Sensor
Head only)		 Models with 2-m cable Approx. 115 g/approx. 65 g
Models with 5-m cable Approx. 175 g/approx. 125 g
Lens Attachment --- Approx. 25 g/approx. 2 g ---
Accessories Instruction Manual

*1. These Sensors are classified as Class 1 laser devices under IEC 60825-1: 2014 and the regulations of Laser Notice
      No. 56 for FDA certification. CDRH (Center for Devices and Radiological Health) registration has been completed.
      E3NC-LH01, E3NC-LH02 (Accession Number: 1220690-003)
      E3NC-LH03 (Accession Number: 1320739-001)
*2. The values were measured using the OMRON standard sensing object (white paper) for the E3NC-LH01, E3NC-LH02,
      and E3NC-LH02 + E39-P52.
      The values for the E3NC-LH03, and E3NC-LH03 + E39-P51 apply when an E39-R21, E39-R22, E39-RS10, or
      E39-RS11 Reflector is used.
      Other Reflectors are not recommended.
*3. Defined at the 1/e2 (13.5%) of the central intensity at the measurement distance.
      Measurement may be influenced if there is light leakage outside the defined region and the surroundings of the target
      object have a high reflectance in comparison to the target object.
*4. Measured at the rated sensing distance.
*5. The E39-P5[] contains a packing to prevent entry of foreign matter. The degree of protection between the
      E3NC-LH[][] and E39-P5[] is not specified.

Amplifier Units

Type Standard models Model for Sensor
Communications Unit
NPN output E3NC-LA21 E3NC-LA7 E3NC-LA24 E3NC-LA0
PNP output E3NC-LA51 E3NC-LA9 E3NC-LA54
Connecting method Pre-wired Wire-saving
Connector		 M8
Connector		 Connector for Sensor
Communications Unit
Inputs/
outputs		 Outputs 2 outputs 1 output --- *1
External inputs 1 input
Power supply voltage *2 10 to 30 VDC, including 10% ripple (p-p) Supplied from the
connector through
the Sensor
Communications Unit
Power consumption *3 At Power Supply Voltage of 24 VDC
Normal mode: 1,560mW max. (Current consumption: 65mA max.)
Eco ON: 1,320 mW max. (Current consumption: 55 mA max.)
Eco LO: 1,440 mW max. (Current consumption: 60 mA max.)
Control outputs *4 Load power supply voltage: 30 VDC max.,
open-collector output
Load current:
Groups of 1 to 3 Amplifier Units: 100 mA max.,
Groups of 4 to 30 Amplifier Units: 20 mA max.
(Residual voltage:
At load current of less than 10 mA: 1 V max.
At load current of 10 to 100 mA: 2 V max.)
OFF current: 0.1 mA max.		 ---
External inputs Refer to *5. ---
Indicators 7-segment displays (Sub digital display: green, Main digital display: white)
Display direction: Switchable between normal and reversed.
OUT indicator (orange), L/D indicator (orange), ST indicator (blue),
DPC indicator (green), and OUT selection indicator
(orange, only on models with 2 outputs)
Protection circuits Power supply reverse polarity protection,
output short-circuit protection, and
output reverse polarity protection		 Power supply reverse
polarity protection and
output short-circuit
protection
Response
time		 Super-high-speed mode (SHS) *6 Operate or reset: 80 μs
High-speed mode (HS) Operate or reset: 250 μs
Standard mode (Stnd) Operate or reset: 1 ms
Giga-power mode (GIGA) Operate or reset: 16 ms
Sensitivity adjustment Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning,
or percentage tuning (-99% to +99%)), or manual adjustment.
Maximum connectable Units 30 With E3NW-ECT: 30 units *7
With E3NW-CRT: 16 units
With E3NW-CCL: 16 units
No. of Units
for mutual
interference
prevention		 Super-high-speed mode (SHS) *6 0
High-speed mode (HS) 2
Standard mode (Stnd) 2
Giga-power mode (GIGA) 4
Functions Dynamic power control (DPC) Provided
Timer Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay
+ OFF-delay timer: 1 to 9,999 ms
Zero reset Negative values can be displayed. (Threshold value is shifted.)
Resetting settings *8 Select from initial reset (factory defaults) or user reset (saved settings).
Eco mode *9 Select from OFF (digital display lit), ECO ON (digital display not lit), and ECO LO (digital display dimmed).
Bank switching Select from banks 1 to 4.
Power tuning Select from ON or OFF.
Output 1 Select from Normal Detection Mode or Area Detection Mode.
Output 2 Select from
normal
detection
mode, alarm
output mode,
or error
output mode.		 --- Select from normal
detection mode, alarm
output mode, or error
output mode.
External input Select from input OFF, tuning, power tuning,
laser OFF, zero reset, or bank switching.		 ---
Hysteresis width Select from standard setting or user setting.
Ambient temperature range* Operating:
Groups of 1 or 2 Amplifier Units: -25 to 55°C,
Groups of 3 to 10 Amplifier Units: -25 to 50°C,
Groups of 11 to 16 Amplifier Units: -25 to 45°C,
Groups of 17 to 30 Amplifier Units: -25 to 40°C
Storage: -30 to 70°C (with no icing or condensation)		 Operating:
Groups of 1 or 2 Amplifier
Units: 0 to 55°C,
Groups of 3 to 10 Amplifier
Units: 0 to 50°C,
Groups of 11 to 16 Amplifier
Units: 0 to 45°C,
Groups of 17 to 30 Amplifier
Units: 0 to 40°C,
Storage: -30 to 70°C
(with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Altitude 2,000 m max.
Installation environment Pollution degree 3 (as per IEC 60947-1)
Insulation resistance 20 MΩ (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions 150m/s2 for 3 times each in
X, Y, and Z directions
Weight (packed state/Amplifier Unit only) Approx. 115 g/
approx. 75 g		 Approx. 60 g/
approx. 20 g		 Approx. 65 g/approx. 25 g
Materials Case Polycarbonate (PC)
Cover Polycarbonate (PC)
Cable Vinyl chloride (PVC)
Accessories Instruction Manual

*1. Two sensor outputs are allocated in the programmable logic controller PLC I/O table.
      PLC operation via Communications Unit enables reading detected values and changing settings.
*2. Applicable Sensor Head is the series of E3NC-LH[][].
*3. At Power Supply Voltage of 10 to 30 VDC.
      Normal mode: 1,650 mW max. (Current consumption: 55 mA max. at 30 VDC, 115 mA max. at 10 VDC)
      Eco ON: 1,410 mW max. (Current consumption: 47 mA max. at 30 VDC, 95 mA max. at 10 VDC)
      Eco LO: 1,530 mW max. (Current consumption: 51 mA max. at 30 VDC, 105 mA max. at 10 VDC)
*4. The total for both outputs of a model with 2 outputs is 100 mA max.
      (Residual voltage: Load current of less than 10 mA: 1 V max., Load current of 10 to 100 mA:2 V max.).
*5. The following details apply to the input.

Contact input (relay or switch) Non-contact input (transistor) Input time*5-1
NPN ON: Shorted to 0 V
(Sourcing current: 1 mA max.).
OFF: Open or shorted to Vcc.		 ON: 1.5 V max. (Sourcing current: 1 mA max.)
OFF: Vcc - 1.5 V to Vcc (Leakage current: 0.1 mA max.)		 ON: 9 ms min.
OFF: 20 ms min.
PNP ON: Shorted to Vcc
(Sinking current: 3 mA max.).
OFF: Open or shorted to 0 V.		 ON: Vcc - 1.5 V to Vcc (Sinking current: 3 mA max.)
OFF: 1.5 V max. (Leakage current: 0.1 mA max.)

*5-1.Input time is 25 ms (ON)/(OFF) only when (in tUnE) or (in PtUn) input is selected.
*6. The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.
*7. When connected to an OMRON NJ-series Controller.
*8. The bank is not reset by the user reset function or saved by the user save function.
*9. Eco LO is supported for Amplifier Units manufactured in July 2014 or later.

* When the number of connected units is 11 or more, the ambient temperature is less than 50°C.

Accessories

Reflectors

Model E39-R21 E39-R22 E39-RS10 E39-RS11
Ambient temperature Operating: -10 to 55°C; Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity Operating/storage: 35% to 85% (with no condensation)
Vibration resistance
(destruction)		 10 to 55 Hz with a 1.5-mm double amplitude or 100 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)		 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC IP67 (E39-R21 and E39-R22 only)
Materials Reflective surface: Methacrylic resin (PMMA)
Back surface: Polybutylene terephthalate (PBT)		 Methacrylic resin (PMMA)
Weight
(packed state/
Reflector only)		 Approx. 30 g/
approx. 5 g		 Approx. 35 g/
approx. 10 g		 Approx. 35 g/
approx. 10 g		 Approx. 30 g/
approx. 5 g
Accessories Instruction manual

Ultra-compact CMOS Laser Sensor: E3NC-S

Sensor Heads

Sensing method Distance-settable
Model E3NC-SH250H E3NC-SH250 E3NC-SH100
Light source
(wavelength)		 Visible semiconductor laser
diode (660 nm), 1.2 mW max.		 Visible semiconductor laser diode (660 nm), 0.54 mW max.
Laser class Class 1 (JIS, IEC/EN, FDA *1, GB/T)
Measurement range 35 to 250 mm (display value: 350 to 2,500) 35 to 100 mm (display value:
350 to 1,000)
Standard detected level
difference *2		 35 to 180mm: 9 mm
180 to 250 mm: 25 mm		 35 to 50 mm: 1.5 mm
50 to 100 mm: 3 mm
Beam size*3 Approx. 1 mm dia. at 250 mm Approx. 0.5 mm dia. at 100 mm
Indicators OUT indicator (orange), STABILITY indicator (green), and ST indicator (blue)
Ambient illumination
(Receiver side)		 Incandescent lamp: 4,000 lx
max.,
Sunlight: 8,000 lx max.		 Incandescent lamp: 2,000 lx
max.,
Sunlight: 4,000 lx max.		 Incandescent lamp: 4,000 lx
max.,
Sunlight: 8,000 lx max.
Ambient temperature
range		 Operating: -10 to 50°C; Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Altitude 2,000 m max.
Installation environment Pollution degree 3 (as per IEC 60947-1)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance
(destruction)		 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
(destruction)		 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC IP67
Connecting method Pre-wired connector (Standard cable length: 2 m)
Materials Case Polybutylene terephthalate (PBT)
Lens Methacrylic resin (PMMA)
Cable Vinyl chloride (PVC)
Weight (packed state/
Sensor Head only)		 Approx. 125 g/approx. 75 g
Accessories Instruction Manual, laser warning label (E3NC-SH250H only)

Note: Incorrect detection may occur outside the measurement range if the object has a high reflection factor.
*1. These Sensors are classified as Class 1 laser devices under IEC 60825-1: 2014 and the regulations of Laser Notice
      No. 56 for FDA certification.
      CDRH (Center for Devices and Radiological Health) registration has been completed. (Accession Number: 1220691-002)
*2. The values were measured at the center of the sensing distance using OMRON’s standard sensing object
      (white ceramic).
*3. Beam size: Defined at the 1/e2 (13.5 %) of the central intensity at the measurement center distance.
      Measurement may be influenced if there is light leakage outside the defined region and the surroundings of the target
      object have a high reflectance in comparison to the target object.
      Also, when detecting a workpiece that is smaller than the beam size, a correct value may not be obtained.

Amplifier Units

Type Standard models Model for Sensor
Communications Unit
NPN output E3NC-SA21 E3NC-SA7 E3NC-SA24 E3NC-SA0
PNP output E3NC-SA51 E3NC-SA9 E3NC-SA54
Connecting method Pre-wired Wire-saving
Connector		 M8
Connector		 Connector for Sensor
Communications Unit
Inputs/
outputs		 Outputs 2 outputs 1 output --- *1
External inputs 1 input
Power supply voltage *2 10 to 30 VDC, including 10% ripple (p-p) Supplied from the
connector through
the Sensor
Communications Unit
Power consumption *3 At Power Supply Voltage of 24 VDC
Normal mode: 1,920 mW max. (Current consumption: 80 mA max.)
Eco ON: 1,680 mW max. (Current consumption: 70 mA max.)
Eco LO: 1,800 mW max. (Current consumption: 75 mA max.)
Control outputs *4 Load power supply voltage: 30 VDC max.,
open-collector output
Load current:
Groups of 1 to 3 Amplifier Units: 100 mA max.,
Groups of 4 to 30 Amplifier Units: 20 mA max.
(Residual voltage:
At load current of less than 10 mA: 1 V max.
At load current of 10 to 100 mA: 2 V max.)
OFF current: 0.1 mA max.		 ――
External inputs Refer to *5.
Indicators 7-segment displays (Sub digital display: green, Main digital display: white)
Display direction: Switchable between normal and reversed.
OUT indicator (orange), L/D indicator (orange), ST indicator (blue),
ZERO indicator (green), and OUT selection indicator
(orange, only on models with 2 outputs)
Protection circuits Power supply reverse polarity protection,
output short-circuit protection, and
output reverse polarity protection		 Power supply reverse
polarity protection and
output short-circuit
protection
Response
time		 Super-high-speed mode (SHS) *6 Operate or reset: 1.5 ms
High-speed mode (HS) Operate or reset: 5 ms
Standard mode (Stnd) Operate or reset: 10 ms
Giga-power mode (GIGA) Operate or reset: 50 ms
Sensitivity adjustment Smart Tuning (2-point tuning, full auto tuning, 1-point tuning, tuning without workpiece,
2-point area tuning, 1-point area tuning, or area tuning without workpiece),
or manual adjustment
Maximum connectable Units 30 With E3NW-ECT: 30 units *7
With E3NW-CRT: 16 units
With E3NW-CCL: 16 units
No. of Units
for mutual
interference
prevention		 Super-high-speed mode (SHS) *6 0
High-speed mode (HS) 2
Standard mode (Stnd) 2
Giga-power mode (GIGA) 2
Functions Timer Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay
+ OFF-delay timer: 1 to 9,999 ms
Zero reset Negative values can be displayed. (Threshold value is shifted.)
Resetting settings *8 Select from initial reset (factory defaults) or user reset (saved settings).
Eco mode *9 Select from OFF (digital display lit), ECO ON (digital display not lit), and ECO LO (digital display dimmed).
Bank switching Select from banks 1 to 4.
Output 1 Select from Normal detection mode, Area detection mode, or hold mode.
Output 2 Select from
Normal
detection
mode or Error
output mode.		 --- Select from Normal
detection mode or Error
output mode.
External input Select from input OFF, tuning, laser OFF,
zero reset, or bank switching.		 ――
Keep function *10 Select from ON or OFF.
Background suppression *11 Select from ON or OFF.
Hysteresis width Select from standard setting or user setting.
Ambient temperature range* Operating:
Groups of 1 or 2 Amplifier Units: -25 to 55°C,
Groups of 3 to 10 Amplifier Units: -25 to 50°C,
Groups of 11 to 16 Amplifier Units: -25 to 45°C,
Groups of 17 to 30 Amplifier Units: -25 to 40°C
Storage: -30 to 70°C (with no icing or condensation)		 Operating:
Groups of 1 or 2 Amplifier
Units: 0 to 55°C,
Groups of 3 to 10 Amplifier
Units: 0 to 50°C,
Groups of 11 to 16 Amplifier
Units: 0 to 45°C,
Groups of 17 to 30 Amplifier
Units: 0 to 40°C
Storage: -30 to 70°C
(with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Insulation resistance 20 MΩ (at 500 VDC)
Altitude 2,000 m max.
Installation environment Pollution degree 3 (as per IEC 60947-1)
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions 150 m/s2 for 3 times each
in X, Y, and Z directions
Weight (packed state/Amplifier Unit only) Approx. 115 g/
approx. 75 g		 Approx. 60 g/
approx. 20 g		 Approx. 65 g/approx. 25 g
Materials Case Polycarbonate (PC)
Cover Polycarbonate (PC)
Cable Vinyl chloride (PVC)
Accessories Instruction Manual

*1. Two sensor outputs are allocated in the programmable logic controller PLC I/O table.
      PLC operation via Communications Unit enables reading detected values and changing settings.
*2. Applicable Sensor Head is the series of E3NC-SH[][].
*3. At Power Supply Voltage of 10 to 30 VDC.
      Normal mode: 2,250 mW max. (Current consumption: 75 mA max. at 30 VDC, 145 mA max. at 10 VDC)
      Eco ON: 2,010 mW max. (Current consumption: 67 mA max. at 30 VDC, 125 mA max. at 10 VDC)
      Eco LO: 2,130 mW max. (Current consumption: 71 mA max. at 30 VDC, 135 mA max. at 10 VDC)
*4. The total for both outputs of a model with 2 outputs is 100 mA max.
      (Residual voltage: Load current of less than 10 mA: 1 V max., Load current of 10 to 100 mA: 2 V max.).
*5. The following details apply to the input.

Contact input (relay or switch) Non-contact input (transistor) Input time*5-1
NPN ON: Shorted to 0 V
(Sourcing current: 1 mA max.).
OFF: Open or shorted to Vcc.		 ON: 1.5 V max. (Sourcing current: 1 mA max.)
OFF: Vcc - 1.5 V to Vcc (Leakage current: 0.1 mA max.)		 ON: 9 ms min.
OFF: 20 ms min.
PNP ON: Shorted to Vcc
(Sinking current: 3 mA max.).
OFF: Open or shorted to 0 V.		 ON: Vcc - 1.5 V to Vcc (Sinking current: 3 mA max.)
OFF: 1.5 V max. (Leakage current: 0.1 mA max.)

*5-1.Input time is 25 ms (ON)/(OFF) only when (in tUnE) input is selected.
*6. The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.
*7. When connected to an OMRON NJ-series Controller.
*8. The bank is not reset by the user reset function or saved by the user save function.
*9. Eco LO is supported for Amplifier Units manufactured in August 2014 or later.
*10. The output for a measurement error is set.
      ON: The value of the output from before the measurement error is retained.
      OFF: The output is turned OFF when a measurement error occurs.
*11. Only the sensing object is detected when tuning.

* When the number of connected units is 11 or more, the ambient temperature is less than 50°C.

last update: May 26, 2025

Product Category

Products

About Us

Solutions

Privacy

Services

Resources

Omron Automation is an industrial automation partner that creates, sells and services fully integrated automation solutions that include sensing, control, safety, vision, motion, robotics and more.

Follow Us

Youtube Facebook Linkedin
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.