Long-distance Photoelectric Sensor with Built-in Amplifier
last update: January 15, 2014
Sensing method | Appearance |
Connection method |
Sensing distance |
Timer function |
Model | |
---|---|---|---|---|---|---|
NPN/PNP selector |
Relay output | |||||
Retro-reflective (with MSR function) |
E39-R2 (provided) |
Pre-wired (2 m) | 10 m (500 mm) * (Red light) |
--- | E3G-R13 2M | --- |
Connector (M12) | E3G-R17 | |||||
Terminal block | --- | E3G-MR19 | ||||
Yes | E3G-MR19T | |||||
Distance-setting |
|
Pre-wired (2 m) | White paper (300 × 300 mm) 0.2 to 2 m (Infrared light) |
--- | E3G-L73 2M | --- |
Connector (M12) | E3G-L77 | |||||
Terminal block | --- | E3G-ML79 | ||||
Yes | E3G-ML79T |
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Appearance | Sensing distance | Model | Minimum order | Remarks | |
---|---|---|---|---|---|
Rated value | Reference value | ||||
|
10 m (500 mm) * | --- | E39-R2 | 1 | Provided with the E3G-R1[]/MR19(T). |
|
--- | 6 m (100 mm) * | E39-R1 | 1 | --- |
Appearance | Model | Minimum order | Applicable model | Remarks |
---|---|---|---|---|
|
E39-L129 | 1 | E3G-MR19(T) E3G-ML79(T) |
Provided with rubber bushing and cap for pullout prevention in vertical direction. |
Appearance | Model | Quantity | Applicable model | Remarks |
---|---|---|---|---|
|
E39-L131 | 1 | E3G-R1[] E3G-L7[] |
--- |
|
E39-L132 | 1 | Rear-mounting use | |
|
E39-L135 | 1 | E3G-MR19(T) E3G-ML79(T) |
Cable pulled out in the downward direction |
|
E39-L136 | 1 | --- |
Note: Mounting Brackets are not provided with Sensors and must be purchased separately.
Cable | Appearance | Cable type | Model | ||
---|---|---|---|---|---|
Standard | Straight |
|
2 m | Three-conductor type | XS2F-D421-DC0-F |
5 m | XS2F-D421-GC0-F | ||||
L-shaped |
|
2 m | XS2F-D422-DC0-F | ||
5 m | XS2F-D422-GC0-F |
Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.
last update: January 15, 2014