Page top

ZW-8000 / 7000 / 5000 Series

Confocal Fiber Displacement Sensor

ZW-8000 / 7000 / 5000 Series

Reliable measurements for any material and surface types

ZW-8000

Sensor Head

Square-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_1_1 3500_lu_1_2 4 μm dia. 0.25 μm 2 m ZW-S8010 2M
0.3 m ZW-S8010 0.3M
3500_lu_1_3 7 μm dia. 0.25 μm 2 m ZW-S8020 2M
0.3 m ZW-S8020 0.3M
3500_lu_1_4 10 μm dia. 0.25 μm 2 m ZW-S8030 2M
0.3 m ZW-S8030 0.3M

* Values when the Sensor Controller ZW-8000T is used.

Pen-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_2_1 3500_lu_2_2 7 μm dia. 0.25 μm 2 m ZW-SP8007 2M
0.3 m ZW-SP8007 0.3M
3500_lu_2_3 10 μm dia. 0.25 μm 2 m ZW-SP8010 2M
0.3 m ZW-SP8010 0.3M

* Values when the Sensor Controller ZW-8000T is used.

Pen-shaped right angle type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_3_1 3500_lu_3_2 8 μm dia. 0.25 μm 2 m ZW-SPR8007 2M
0.3 m ZW-SPR8007 0.3M
3500_lu_3_3 11 μm dia. 0.25 μm 2 m ZW-SPR8010 2M
0.3 m ZW-SPR8010 0.3M

* Values when the Sensor Controller ZW-8000T is used.

Sensor Controller with EtherCAT

Appearance Power supply Output type Model
3500_lu_4_1 24 VDC NPN/PNP ZW-8000T

Cable

Appearance Item Cable length Model
3500_lu_5_1 Extension Fiber Cable (from Sensor Head to Sensor Controller),
(Fiber Adapter ZW-XFCS is included)
2 m ZW-XF8002R
5 m ZW-XF8005R
10 m ZW-XF8010R
20 m ZW-XF8020R
30 m ZW-XF8030R
3500_lu_5_2 Fiber Adapter (used between Sensor Head pre-wired cable and
Extension Fiber Cable)
ZW-XFCS

Note: Extension Fiber Cable ZW-XF80[][]R can be used with the firmware version 3.000 or later. If you have an old version
         Sensor Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor
         Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on
         member registration and firmware download.

ZW-7000

Sensor Head

Square-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_6_1 3500_lu_6_2 50 μm dia. 0.25 μm 2 m ZW-S7010 2M
0.3 m ZW-S7010 0.3M
3500_lu_6_3 70 μm dia. 0.25 μm 2 m ZW-S7020 2M
0.3 m ZW-S7020 0.3M
3500_lu_6_4 100 μm dia. 0.25 μm 2 m ZW-S7030 2M
0.3 m ZW-S7030 0.3M
3500_lu_6_5 120 μm dia. 0.25 μm 2m ZW-S7040 2M
0.3m ZW-S7040 0.3M

* Values when the Sensor Controller ZW-7000T is used.

Pen-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_7_1 3500_lu_7_2 130 μm dia. 0.25 μm 2 m ZW-SP7007 2M
0.3 m ZW-SP7007 0.3M
3500_lu_7_3 170 μm dia. 0.25 μm 2 m ZW-SP7010 2M
0.3 m ZW-SP7010 0.3M

* Values when the Sensor Controller ZW-7000T is used.

Pen-shaped right angle type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_8_1 3500_lu_8_2 150 μm dia. 0.25 μm 2 m ZW-SPR7007 2M
0.3 m ZW-SPR7007 0.3M
3500_lu_8_3 190 μm dia. 0.25 μm 2 m ZW-SPR7010 2M
0.3 m ZW-SPR7010 0.3M

* Values when the Sensor Controller ZW-7000T is used.

Sensor Controller with EtherCAT

Appearance Power supply Output type Model
3500_lu_9_1 24 VDC NPN/PNP ZW-7000T

Cable

Appearance Item Cable length Model
3500_lu_10_1 Extension Fiber Cable (from Sensor Head to Sensor Controller),
(Fiber Adapter ZW-XFCM is included)
2 m ZW-XF7002R
5 m ZW-XF7005R
10 m ZW-XF7010R
20 m ZW-XF7020R
30 m ZW-XF7030R
3500_lu_10_2 Fiber Adapter (used between Sensor Head pre-wired cable and
Extension Fiber Cable)
ZW-XFCM

Note: Cables of 10, 20, and 30 m can be used with the firmware version 2.100 or later. If you have an old version Sensor
         Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor
         Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on
         member registration and firmware download.

ZW-5000

Sensor Head

Square-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_11_1 3500_lu_11_2 9 μm dia. 0.25 μm 2 m ZW-S5010 2M
0.3 m ZW-S5010 0.3M
3500_lu_11_3 13 μm dia. 0.25 μm 2 m ZW-S5020 2M
0.3 m ZW-S5020 0.3M
3500_lu_11_4 18 μm dia. 0.25 μm 2 m ZW-S5030 2M
0.3 m ZW-S5030 0.3M

* Values when the Sensor Controller ZW-5000T is used.

Pen-shaped straight type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_12_1 3500_lu_12_2 13 μm dia. 0.25 μm 2 m ZW-SP5007 2M
0.3 m ZW-SP5007 0.3M
3500_lu_12_3 18 μm dia. 0.25 μm 2 m ZW-SP5010 2M
0.3 m ZW-SP5010 0.3M

* Values when the Sensor Controller ZW-5000T is used.

Pen-shaped right angle type

Appearance Measuring range Spot
diameter
Static
resolution *
Cable
length
Model
3500_lu_13_1 3500_lu_13_2 15 μm dia. 0.25 μm 2 m ZW-SPR5007 2M
0.3 m ZW-SPR5007 0.3M
3500_lu_13_3 20 μm dia. 0.25 μm 2 m ZW-SPR5010 2M
0.3 m ZW-SPR5010 0.3M

* Values when the Sensor Controller ZW-5000T is used.

Sensor Controller with EtherCAT

Appearance Power supply Output type Model
3500_lu_14_1 24 VDC NPN/PNP ZW-5000T

Cable

Appearance Item Cable length Model
3500_lu_15_1 Extension Fiber Cable (from Sensor Head to Sensor Controller),
(Fiber Adapter ZW-XFC2 is included)
2 m ZW-XF5002R
5 m ZW-XF5005R
10 m ZW-XF5010R
20 m ZW-XF5020R
30 m ZW-XF5030R
3500_lu_15_2 Fiber Adapter (used between Sensor Head pre-wired cable and
Extension Fiber Cable)
ZW-XFC2

Note: Extension Fiber Cable ZW-XF50[][]R can be used with the firmware version 2.100 or later. If you have an old version
         Sensor Controller, register as a Sysmac member and download the latest firmware and tools to update your Sensor
         Controller. Refer to the Sysmac member registration sheet that is enclosed with the Sensor Controller for details on
         member registration and firmware download.

Common cables

Appearance Item Cable length Model
3500_lu_16_1 Parallel caable for ZW-8000T/7000T/5000T
32-pole (included with Sensor Controller ZW-8000T/7000T/5000T)
2 m ZW-XCP2E
3500_lu_16_2 RS-232C Cable for personal computer 2 m ZW-XRS2
3500_lu_16_3 RS-232C Cable for PLC/programmable terminal 2 m ZW-XPT2

Recommended EtherCAT Communications Cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

Cable with Connectors

Item Appearance Recommended
manufacturer
Cable
length
(m) *1
Model
Standard type
Cable with Connectors on Both Ends
(RJ45/RJ45)
Wire Gauge and Number of Pairs:
AWG26, 4-pair Cable
Cable Sheath material: LSZH *2
Cable color: Yellow *3
3500_lu_17_1 OMRON 0.3 XS6W-6LSZH8SS30CM-Y
0.5 XS6W-6LSZH8SS50CM-Y
1 XS6W-6LSZH8SS100CM-Y
2 XS6W-6LSZH8SS200CM-Y
3 XS6W-6LSZH8SS300CM-Y
5 XS6W-6LSZH8SS500CM-Y
Rugged type
Cable with Connectors on Both Ends
(RJ45/RJ45)
Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable
3500_lu_17_2 OMRON 0.3 XS5W-T421-AMD-K
0.5 XS5W-T421-BMD-K
1 XS5W-T421-CMD-K
2 XS5W-T421-DMD-K
5 XS5W-T421-GMD-K
10 XS5W-T421-JMD-K
Rugged type
Cable with Connectors on Both Ends
(M12 Straight/RJ45)
Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable
3500_lu_17_3 OMRON 0.3 XS5W-T421-AMC-K
0.5 XS5W-T421-BMC-K
1 XS5W-T421-CMC-K
2 XS5W-T421-DMC-K
5 XS5W-T421-GMC-K
10 XS5W-T421-JMC-K
Rugged type
Cable with Connectors on Both Ends
(M12 Right-angle/RJ45)
Wire Gauge and Number of Pairs:
AWG22, 2-pair Cable
3500_lu_17_4 OMRON 0.3 XS5W-T422-AMC-K
0.5 XS5W-T422-BMC-K
1 XS5W-T422-CMC-K
2 XS5W-T422-DMC-K
5 XS5W-T422-GMC-K
10 XS5W-T422-JMC-K

Note: For details, refer to Cat.No.G019.
*1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20m are available.
      Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
*3. Cables colors are available in blue, yellow, or Green

Cables / Connectors

Wire Gauge and Number of Pairs: AWG24, 4-pair Cable

Item Appearance Recommended manufacturer Model
Cables Hitachi Metals, Ltd. NETSTAR-C5E SAB 0.5 × 4P CP *
Kuramo Electric Co. KETH-SB *
SWCC Showa Cable Systems Co. FAE-5004 *
RJ45 Connectors Panduit Corporation MPS588-C *

* We recommend to use above cable and connector together.

Wire Gauge and Number of Pairs: AWG22, 2-pair Cable

Item Appearance Recommended manufacturer Model
Cables Kuramo Electric Co. KETH-PSB-OMR *
JMACS Japan Co.,Ltd. PNET/B *
RJ45 Assembly Connector 3500_lu_19_1 OMRON XS6G-T421-1 *

Note: Connect both ends of cable shielded wires to the connector hoods.
* We recommend to use above cable and connector together.

Industrial switching hubs for Ethernet

Appearance Number of ports Failure detection Current consumption Model
3500_lu_20_1 3 None 0.22A W4S1-03B
3500_lu_20_2 5 None 0.22A W4S1-05B
Supported W4S1-05C

Note: Industrial switching hubs are cannot be used for EtherCAT.

EtherCAT junction slaves

Appearance Number of ports Power supply voltage Current consumption Model
3500_lu_21_1 3 20.4 to 28.8 VDC
(24 VDC -15 to 20%)
0.08A GX-JC03
3500_lu_21_2 6 0.17A GX-JC06

Note: 1. Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC[]81/[]82.
         2. EtherCAT junction slaves cannot be used for EtherNet/IP™ and Ethernet.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.
Each model of licenses does not include DVD.

Item Specifications Model Stand-
ards
Number of
licenses
Media
Sysmac Studio
Standard
Edition
Ver.1[][] *2
The Sysmac Studio is the software that
provides an integrated environment for
setting, programming, debugging and
maintenance of machine automation
controllers including the NJ/NX-series CPU
Units, NY-series Industrial PC, EtherCat
Slave, and the HMI.
Sysmac Studio runs on the following OS.
Windows 7 (32-bit/64-bit version)/Windows 8
(32-bit/64-bit version)/Windows 8.1 (32-bit/
64-bit version)/Windows 10 (32-bit/64-bit
version)
This software provides functions of the
Measurement Sensor Edition. Refer to your
OMRON website for details.

(Media only)
DVD SYSMAC-SE200D
1 license*1 SYSMAC-SE201L
Sysmac Studio
Measurement
Sensor Edition
Ver.1.[][]
Sysmac Studio Measurement Sensor Edition
is a limited license that provides selected
functions required for ZW-series
Displacement Sensor settings.
Because this product is a license only, you
need the Sysmac Standard Edition DVD media
to install it.
1 license SYSMAC-ME001L
3 license SYSMAC-ME003L

*1. Multiple licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*2. ZW-8000/7000/5000 is supported by Sysmac Studio version 1.22 or higher.

Fiber Cleaner

Item Recommended
manufacturer
Model Applicable Model Contacts
ZW-8000 ZW-7000 ZW-5000
Fiber Connector
Cleaner *1
OMRON ZW-XCL Yes Yes Yes OMRON
NEOCLEAN-M NTT Advanced
Technology Corporation
ATC-NE-M1 No Yes No *2
OPTIPOP R1 ATC-RE-01 Yes
(Sensor Head
only)
No Yes
(Sensor Head
only)

*1. Place orders in units of boxes (contacting 10 units).
*2. Contacts
      [Request for an Estimate]
        http://www.ntt-at.com/product/optical_cleaner/Distributors.html
      [Request for Information]
        NTT Advanced Technology Corporation
        Muza Kawasaki Central Tower, 1310 Omiya-cho Saiwai-ku, Kawasaki-shi, Kanagawa, 212-0014, Japan
        TEL: +81 44 589 5894
        http://www.ntt-at.com/product/optical_cleaner/