Industrial Automation|

Thailand

ลดราคาล้างสต๊อก

Sitemap

Contact

OMRON IA Global

 
Ask the Guru

ËÒ¡¤Ø³à¡Ô´»Ñ­ËÒà¡ÕèÂǡѺ¡ÒûÃÐÂØ¡µìãªé§Ò¹¼ÅÔµÀѳ±ì ¤Ø³ÊÒÁÒö
Ê觤ӶÒÁ 
à¾×èÍ»ÃÖ¡ÉÒ¼ÙéàªÕèÂǪҭä´é·Õè¹Õè!


Select Country

 

View frequently asked questions in your country.

Australia Philippines
India Singapore
Indonesia Thailand
Malaysia
New Zealand
Other region

 

Frequently Asked Questions

Timer Topic: Alternative Model for H3BA Timer

 

FAQ No. FAQ03103

 

Question

What is an alternative model for the H3BA Multi-functional Timer?


Answer

 

1. It depends on the H3BA model. Refer to the following table.

 

Specification of H3BA Models

 

Note:

1. The bottom row gives recommended alternative models or models with alternative functions. For details, see the following information.

2. The alternative model in column (1) is the H3CR-A. Because the length of the body is about 12 mm shorter than that of the H3BA, the Y92H-7 Hold-down Clips should be used instead of the Y92H-1 Hold-down Clips when using the PL11 Socket.

3. There is no alternative in column (2) because the H3CR-A has no top-wired terminal. However, an alternative timer function can be achieved by using the H3CR-A and the P2CF-11 Front Connecting Socket, and wiring to the Front Connecting Socket. If a top-wired terminal is required, see whether the H2C-F Motor Timer can be used.

4. The alternative model in column (3) is the H3CR-A8. Because the length of the body is about 12 mm shorter than that of the H3BA-8H, the Y92H-8 Hold-down Clips should be used instead of the Y92H-2 Hold-down Clips when using the PF085A Socket and the Y92H-7 Hold-down Clips should be used instead of the Y92H-1 Hold-down Clips when using the PL08 Socket.

5. The alternative model in column (4) is the H3CR-A8E. The Hold-down Clips to be used are the same as those described for the H3BA-8 in column (3).

 

General Comparison of the H3BA and H3CR-A Timers
 

Comparison between H3BA and H3CR-A Timers

 

Note 1: The H3CR-A has no model that is equivalent to the top-wired terminal model of the H3BA-FA.

Note 2: The length of the square body part of the H3CR-A is 52.3 mm (short body), which is approximately 12 mm shorter than the 63.7-mm (long body) length of the H3BA surface mounting/flush mounting type. Because of this, when using Hold-down Clips with an alternative model, the Hold-down Clips must be changed for models with a shorter body. The H3CR Series also has a long-body model, which is distinguished from the short-body model by adding the letter "L" to the model number.

 

 

Other Timer FAQs

 Is there an ON/OFF repeat timer that lets you set the ON time and OFF time separately?

 What is the difference between a Timer and a Time Switch?

 What are time-limit contacts?